“What muscles does the bench press work?”
There’s a common question among gymgoers, especially those new to weightlifting.
Why is there this uncertainty?
Two reasons:
First, the bench press trains several major and minor muscle groups simultaneously, so understanding the exact muscles involved in a bench press can be confusing.
And second, the muscles the bench press works out can change depending on how you perform the exercise. For example, using an incline or decline bench or a narrow or wide grip influences which muscles you emphasize.
In this article, we’ll untangle this Gordian knot.
You’ll learn the muscles that bench press works, how grip width alters things, why the bench press is such an effective exercise, how to perform it correctly, and more.
What Is the Bench Press?
Before we get into the muscles involved in a bench press, let’s define what a bench press is.
The bench press is an upper body exercise that involves lying on a flat bench while holding a barbell over your chest with a slightly wider than shoulder-width grip, lowering the bar to your chest, then pressing it up again. Here’s how it looks:
Making this distinction is important because there are many bench press variations and each emphasizes slightly different muscles.
For example, compared to the flat barbell bench press, the incline bench press (a bench press performed on a bench angled at around 45 degrees) emphasizes the upper pecs, while the close-grip bench press (a bench press performed with a shoulder-width grip) emphasizes the triceps.
Bench Press: Muscles Worked
The bench press is a compound exercise, which means it trains several major muscle groups simultaneously. While it primarily trains the upper body, the bench press also involves the lower body to a notable degree (which we’ll discuss later).
What muscles does the bench press work specifically, though?
Let’s look at what muscle activation data tells us about the muscles you’re working while benching in the gym.
Primary Bench Press Muscles
The primary muscles worked in the bench press are the pectoralis majors (“pecs”), anterior deltoids (“front delts”), and triceps brachii (“triceps”).
Let’s take a closer look at how each of these muscles contributes:
- Pectoralis Major: The pectoralis major is the large, fan-shaped muscle on either side of your chest. It has two sections or “heads:” the sternocostal head (“lower pec”) and clavicular head (“upper pec”). Its primary function is horizontal shoulder adduction (moving the upper arms toward the centerline of your body at shoulder height), though it also aids in shoulder flexion (raising your arms in front of you). These are the two main movements involved in the bench press, which explains why research typically shows that the pecs are the main muscles worked in the bench press.
- Anterior Deltoid: The anterior deltoids are the front sections of your shoulder muscles. Compared to the other deltoid heads (the “side” and “rear delts”), the front delts are the most responsible for shoulder flexion, which is why they’re the most involved in the bench press.
- Triceps Brachii: The triceps is the muscle group located on the back of your upper arm between the shoulder and elbow. Its main function is elbow extension (straightening the elbows), which is critical to “lock out” during the bench press.
Here’s how these muscles look on your body:
Secondary Bench Press Muscles
“Secondary” bench press muscles are those that play a smaller role in the bench press. They typically assist the primary muscles or stabilize the movement, allowing the main movers to handle the bulk of the work. Let’s take a closer look at the secondary muscles that the bench press works:
- Pectoralis Minor: The “pec minor” lies beneath the pec major and helps stabilize and move the scapula (shoulder blade), which keeps your shoulders stable and safe while benching in the gym.
- Biceps Brachii: The biceps brachii (“biceps”) stabilize the upper arms and shoulders while benching, especially when you take a wider grip. Benching alone won’t help you build big biceps, though—for that you need to train your biceps directly.
- Trapezius: The trapezius muscles, or “traps,” are large muscles that start at the base of the skull and extend down the neck and upper back. They contribute to the bench press by stabilizing your shoulders and helping you maintain upper-body rigidity, which is essential when handling heavy weights.
- Latissimus Dorsi: The “lats” are the large muscles that start at the base of the spine, wrap around the sides of the torso, and connect to the upper arm. For most gymgoers, the “lats” play a small role in stabilizing the shoulders during the bench press. For powerlifters who use a pronounced “back arch” while benching, the lats become significantly more involved and may help you lift more weight.
- Lateral Deltoid: The side delt muscles are involved in the bench press, providing support to the front delts to help press the bar.
- Serratus Anterior: The serratus anterior muscles are on the sides of the chest and connect the upper ribs to the shoulder blade. They stabilize the shoulders during the bench press.
Here’s how the secondary muscles involved in the bench press look on your body:
Other Supporting Muscles
It’s easy to see how the primary and secondary muscles feature in the bench press: most are directly involved in lifting the barbell or support the muscles doing the pressing.
However, the bench press works many more, less-obvious muscles. It doesn’t train these “supporting” muscles enough to spur growth, but they’re essential for maintaining proper form.
- Quadriceps: The “quads” are the muscles on the front of your thigh. You use them while benching in the gym to “drive” through your legs, which increases the stability and rigidity of your entire body and may boost your performance.
- Gluteal Muscles: Similarly to the quads, the “glutes,” or “butt muscles,” help you drive through your lower body to increase your bench performance.
- Core: The core muscles, including the abs, obliques, and lower back, stabilize your torso while benching. They keep your body rigid and aligned on the bench, preventing you from shifting side to side during the press.
- Forearms: Your forearms help stabilize your wrists and prevent them from bending or wobbling, which is critical for maintaining an efficient bar path and reducing the risk of injury.
Does Grip Width Change the Muscles the Bench Press Works?
It’s a longstanding piety among weightlifters that bench pressing with a wide grip (hands wider than 1.5 times shoulder-width apart) primarily trains your pecs and pressing with a narrow grip (hands around shoulder-width apart) emphasizes your triceps.
Research challenges this dogma, however.
While studies typically show that using a narrower grip increases triceps activation, research doesn’t indicate that using a wider-than-normal grip width significantly improves chest muscle activation.
Another thing to keep in mind is that a wide grip puts more stress on the shoulders. This extra shoulder torque means your rotator cuff muscles and biceps tendons have to work harder to keep your shoulders stable, which may raise your risk of injury.
What Are the Benefits of the Bench Press?
The bench press allows you to train multiple upper body muscle groups simultaneously. It also lets you train with heavy weights safely and progress regularly.
These benefits mean the bench press is ideal for building muscle, gaining strength, and developing power and endurance throughout your upper body.
Consequently, the bench press is a fantastic exercise for improving athletic performance in sports that involve pushing (basketball, football, rugby, soccer, wrestling, jiu jitsu, etc.), throwing (basketball, football, baseball, etc.) or punching.
It also makes everyday movements easier, including pushing open heavy doors, getting up off the floor, and maneuvering a shopping cart. In other words, it helps you develop “functional” strength that makes day-to-day tasks more straightforward.
How to Bench Press with Proper From
- Position yourself on a bench so your eyes are directly under the bar, tuck your shoulder blades back and down, and grip the bar with your hands slightly wider than shoulder-width apart.
- Plant your feet on the floor about shoulder-width apart, slightly arch your back, squeeze the bar as hard as you can, and move it from the hooks directly over your chest.
- Keeping your elbows 6-to-10 inches from your sides, lower the bar to your chest.
- Press the bar back to the starting position.
Here’s how it should look when you put it all together:
What Muscles Does the Bench Press Work?: FAQs
FAQ #1: Does the bench press work your triceps?
Yes, the bench press works your triceps. That said, research shows you probably need to do more than bench press to develop proportional triceps.
Check out this article to learn more:
Is the Bench Press Enough to Train Your Triceps?
FAQ #2: Does the bench press work your shoulders?
Yes, the bench press works your shoulders, though it trains the front of your shoulders significantly more than the side and rear delts. Thus, to develop “3D” delts, you’ll need to do more than bench. For balanced, symmetrical shoulders, check out the workout in this article:
The Best Full Shoulder Workout Routine, According to Science
FAQ #3: Does the bench press work your back?
Yes, the bench press works your back, but probably not enough to build back muscle. That is, the lats and traps stabilize your upper body during the bench press, but they don’t get enough stimulation for muscle growth. To develop these muscle, you need to do effective back workouts, like the routines in this article:
The Best Back Workout Routines for Mass & Hypertrophy
Scientific References +
- López-Vivancos, Abraham, et al. “Electromyographic Activity of the Pectoralis Major Muscle during Traditional Bench Press and Other Variants of Pectoral Exercises: A Systematic Review and Meta-Analysis.” Applied Sciences, vol. 13, no. 8, 1 Jan. 2023, p. 5203, www.mdpi.com/2076-3417/13/8/5203, https://doi.org/10.3390/app13085203.
- Stastny, Petr, et al. “A Systematic Review of Surface Electromyography Analyses of the Bench Press Movement Task.” PloS One, vol. 12, no. 2, 2017, p. e0171632, www.ncbi.nlm.nih.gov/pubmed/28170449, https://doi.org/10.1371/journal.pone.0171632.
- Campos, Yuri A. C., et al. “Different Shoulder Exercises Affect the Activation of Deltoid Portions in Resistance-Trained Individuals.” Journal of Human Kinetics, vol. 75, no. 1, 31 Oct. 2020, pp. 5–14, https://doi.org/10.2478/hukin-2020-0033.
- Landin, Dennis, et al. “Functions of the Triceps Brachii in Humans: A Review.” Journal of Clinical Medicine Research, vol. 10, no. 4, 2018, pp. 290–293, https://doi.org/10.14740/jocmr3340w.
- Bhatia, Deepak N, et al. “The “Bench‐Presser’s Shoulder”: An Overuse Insertional Tendinopathy of the Pectoralis Minor Muscle.” British Journal of Sports Medicine, vol. 41, no. 8, 1 Aug. 2007, pp. e1–e4, www.ncbi.nlm.nih.gov/pmc/articles/PMC2465431/, https://doi.org/10.1136/bjsm.2006.032383. Accessed 26 July 2021.
- Saeterbakken, Atle Hole, et al. “The Effect of Grip Width on Muscle Strength and Electromyographic Activity in Bench Press among Novice- and Resistance-Trained Men.” International Journal of Environmental Research and Public Health, vol. 18, no. 12, 14 June 2021, p. 6444, https://doi.org/10.3390/ijerph18126444.
- Ostrowski, Stephanie J., et al. “Effect of an Unstable Load on Primary and Stabilizing Muscles during the Bench Press.” Journal of Strength and Conditioning Research, vol. 31, no. 2, Feb. 2017, pp. 430–434, https://doi.org/10.1519/jsc.0000000000001497. Accessed 26 Apr. 2021.
- Chris, Barnett, et al. “Effects of Variations of the Bench Press Exercise on The... : The Journal of Strength & Conditioning Research.” LWW, 2019, journals.lww.com/nsca-jscr/abstract/1995/11000/effects_of_variations_of_the_bench_press_exercise.3.aspx.
- Cudlip, Alan C., et al. “Upper Extremity Muscle Activity and Joint Loading Changes between the Standard and Powerlifting Bench Press Techniques.” Journal of Sports Sciences, 2 Mar. 2022, pp. 1–9, https://doi.org/10.1080/02640414.2022.2046937. Accessed 5 Apr. 2022.
- Schick, Evan E, et al. “A Comparison of Muscle Activation between a Smith Machine and Free Weight Bench Press.” Journal of Strength and Conditioning Research, vol. 24, no. 3, Mar. 2010, pp. 779–784, https://doi.org/10.1519/jsc.0b013e3181cc2237.
- Tucci, Helga T., et al. “Muscle Activation of Selected Shoulder Muscles during Unilateral Wall and Bench Press Tasks under Submaximal Isometric Effort.” Journal of Orthopaedic & Sports Physical Therapy, vol. 41, no. 7, July 2011, pp. 520–525, https://doi.org/10.2519/jospt.2011.3418. Accessed 7 Apr. 2020.
- Kristiansen, M., et al. “Inter-Subject Variability of Muscle Synergies during Bench Press in Power Lifters and Untrained Individuals.” Scandinavian Journal of Medicine & Science in Sports, vol. 25, no. 1, 24 Dec. 2013, pp. 89–97, https://doi.org/10.1111/sms.12167.
- Gardner, Jacob , et al. The Effects of 5 Weeks of Leg-Drive Training on Bench Press Performance in Recreationally-Trained, College-Age Men. May 2021, www.researchgate.net/publication/351538420_The_Effects_of_5_Weeks_of_Leg-Drive_Training_on_Bench_Press_Performance_in_Recreationally-Trained_College-Age_Men, https://doi.org/10.1007/s42978-021-00118-0.
- Lehman, Gregory J. “The Influence of Grip Width and Forearm Pronation/Supination on Upper-Body Myoelectric Activity during the Flat Bench Press.” The Journal of Strength and Conditioning Research, vol. 19, no. 3, 2005, p. 587, https://doi.org/10.1519/r-15024.1.
- Barnett, Chris , et al. Effects of Variations of the Bench Press Exercise on the EMG Activity of Five Shoulder Muscles. Nov. 1995, www.researchgate.net/publication/232217991_Effects_of_Variations_of_the_Bench_Press_Exercise_on_the_EMG_Activity_of_Five_Shoulder_Muscles, https://doi.org/10.1519/00124278-199511000-00003.
- Saeterbakken, Atle Hole, et al. “The Effects of Bench Press Variations in Competitive Athletes on Muscle Activity and Performance.” Journal of Human Kinetics, vol. 57, no. 1, 22 June 2017, pp. 61–71, https://doi.org/10.1515/hukin-2017-0047.
- Larsen, Stian, et al. “A Biomechanical Analysis of Wide, Medium, and Narrow Grip Width Effects on Kinematics, Horizontal Kinetics, and Muscle Activity on the Sticking Region in Recreationally Trained Males during 1-RM Bench Pressing.” Frontiers in Sports and Active Living, vol. 2, no. 637066, 22 Jan. 2021, https://doi.org/10.3389/fspor.2020.637066.
- Fees, Martin, et al. “Upper Extremity Weight-Training Modifications for the Injured Athlete.” The American Journal of Sports Medicine, vol. 26, no. 5, Sept. 1998, pp. 732–742, https://doi.org/10.1177/03635465980260052301.
- Green, Carly M., and Paul Comfort. “The Affect of Grip Width on Bench Press Performance and Risk of Injury.” Strength & Conditioning Journal, vol. 29, no. 5, 1 Oct. 2007, pp. 10–14, journals.lww.com/nsca-scj/abstract/2007/10000/the_affect_of_grip_width_on_bench_press.1.aspx.
- Ronai, Peter. “The Bench Press Exercise.” ACSMʼs Health & Fitness Journal, vol. 22, no. 6, 2018, pp. 52–57, https://doi.org/10.1249/fit.0000000000000432.
- Lum, Danny, et al. “Effects of Performing Isometric Bench Press Training at Single versus Multiple Joint Positions on Strength and Power Performance.” International Journal of Sports Physiology and Performance, 2022, pp. 1–9, https://doi.org/10.1123/ijspp.2021-0461. Accessed 5 May 2022.
- Ronai, Peter. “The YMCA Bench Press Test.” ACSM’S Health & Fitness Journal, vol. 24, no. 6, Nov. 2020, pp. 33–36, https://doi.org/10.1249/fit.0000000000000619.
- Lawton, T., et al. “The Effect of Continuous Repetition Training and Intra-Set Rest Training on Bench Press Strength and Power.” The Journal of Sports Medicine and Physical Fitness, vol. 44, no. 4, 1 Dec. 2004, pp. 361–367, pubmed.ncbi.nlm.nih.gov/15758847/. Accessed 7 June 2023.